Overexpression of the genes of glycerol catabolism and glycerol facilitator improves glycerol conversion to ethanol in the methylotrophic thermotolerant yeast Ogataea polymorpha

Production of fuel ethanol is one of the possible ways to utilize crude glycerol, substantial amounts of which are produced by biodiesel industry. Earlier, we have described construction of the recombinant strains of methylotrophic thermotolerant yeast Ogataea polymorpha with simultaneous overexpression of the genes PDC1 and ADH1, which produced increased amounts of ethanol from glycerol. In this work, we have further improved these strains by overexpression of genes involved either in oxidative (through dihydroxyacetone) or phosphorylative (through glycerol-3-phosphate) pathway of glycerol catabolism, as well as heterologous gene coding for glycerol transporter FPS1 from Komagataella phaffii (formerly, Pichia pastoris). Obtained recombinant strains produced up to 10.7 g/L of ethanol (with ethanol productivity 30 mg/g of biomass/hr and yield 132 mg/g of consumed glycerol) from pure glycerol and up to 3.55 g/L of ethanol (with ethanol productivity 11.6 mg/g of biomass/hr and yield 72.3 mg/g of consumed glycerol) from crude glycerol as a carbon source, which is approximately 15 times more relative to that of the O. polymorpha wild-type strain and 2.2 more relative to the earlier constructed strain.     

Clearance of FGF‐23 during continuous renal replacement therapy

FGF‐23 is a 32 kDa protein that is a key regulator of phosphorus and vitamin D metabolism. Emerging evidence also demonstrates that FGF‐23 increases within 24 hours of acute kidney injury (AKI) and may be associated with adverse clinical outcomes. We conducted this study to evaluate FGF23 clearance during continuous veno‐venous hemofiltration (CVVH) in critically ill patients with AKI. We demonstrate that plasma clearance of FGF‐23 during CVVH is ～11 mL/min and the mean sieving coefficient is 0.27 ± 0.1. Future studies will need to clarify FGF‐23's role in adverse outcomes among AKI patients, and whether therapies aimed at reducing FGF‐23 levels may be beneficial.     

Solid lubricant behavior of MoS2 and WSe2-based nanocomposite coatings

Abstract

Tribological coatings made of MoS₂ and WSe₂ phases and their corresponding combinations with tungsten carbide (WC) were prepared by non-reactive magnetron sputtering of individual targets of similar composition. A comparative tribological analysis of these multiphase coatings was done in both ambient air (30–40% relative humidity, RH) and dry nitrogen (RH<7%) environments using the same tribometer and testing conditions. A nanostructural study using advanced transmission electron microscopy of the initial coatings and examination of the counterfaces after the friction test using different analytical tools helped to elucidate what governs the tribological behavior for each type of environment. This allowed conclusions to be made about the influence of the coating microstructure and composition on the tribological response. The best performance obtained with a WSe_x film (specific wear rate of 2 × 10^?8 mm³ N^–1m^–1 and a friction coefficient of 0.03–0.05) was compared with that of the well-established MoS₂ lubricant material.     

Cyclic staff scheduling: optimization models for some real-life problems

In this work, we propose a general integer programming model to address the staff scheduling problem, flexible enough to be easily adapted to a wide-range of real-world problems. The model is applied with slight changes to two case studies: a glass plant and a continuous care unit, and also to a collection of benchmark instances available in the literature. The emphasis of our approach is on a novel formulation of sequence constraints and also on workload balance, which is tackled through cyclic scheduling. Models are solved using the CPLEX solver. Computational results indicate that optimal solutions can be achieved within a reasonable amount of time.     

Spectroscopic evaluation of the colour play effect of thermochromic liquid crystal printing inks

Colour changes of a thermochromic liquid crystal (TLC) ink printed on a black substrate are clearly observed by the naked eye, and therefore it is reasonable to expect that every approach recommended for colour measurements of samples with solid colour would be appropriate. In addition, the published spectroscopic analyses of TLC inks do not provide any guidance or limitations for the measurement geometry. On the other hand, our study demonstrates that spectroscopic measurements of such samples are not so straightforward. When using the most simple and commonly used measurement equipment with a directional illumination and viewing approach, the temperature-dependent spectral features resolve in a narrow spectral region that gives only a small part of the colour play effect. Detection of the entire effect requires the use of integrating spheres, which spatially integrate the radiant flux reflected on a sample in any direction; better results are obtained by spheres of larger diameter. The comparision of spectroscopic and colorimetric results obtained when different measurement geometries are applied on the same sample may demonstrate certain properties of the liquid crystal material inside microcapsules and help in understanding some details of the optical properties of the ink layer.     

A methodology for screening of microalgae as a decision making tool for energy and green chemical process applications

The increasing interest for biotechnological use of microalgae demands a methodology for selection of species suitable to support the development of technologies based on the use of such non-conventional renewable raw material, i.e., green industrial applications. The vast and expanding collection of experimental data on both cell growth and biomass composition available in the literature can be used to reduce the cost of the experimental investigations required to support process engineering and optimization. Selecting the appropriate organism requires extracting useful information from such data, a cumbersome task since various multidisciplinary factors must be considered. This paper presents a computer-aided methodology for selecting appropriate algal species given an energy or green chemical process application employing microalgae as a renewable raw material. The approach is “system oriented”, based on biomass composition and chemical processing of the biomass downstream of the CO₂ biofixation and harvesting operations. Quantitative performance results are supported by professional process simulation. Besides comparison of a set of species performances, the proposed methodology also allows the discrimination among distinct algal compositions resulting from different growth conditions for a given species. Furthermore, three categories of screening metrics are proposed to be maximized by the decision making procedure in order to elicit the relevant information. To demonstrate the potential of the proposed methodology, a databank of both biochemical and elemental compositions of microalgal biomass was used in three green applications: Assessment of biomass heating value; production of syngas by gasification of the biomass; and production of Bio-H₂. Within the accuracy of the databank employed to illustrate the procedure, the methodology selected Botryococcus braunii and Isochrysis galbana as potential promising candidates, for the three examined applications.     

Ion bombardment induced surface electrical degradation monitoring by means of luminescence in aluminas

Oxide ceramics for use as electrical insulators in future fusion devices, will be exposed to ionization and displacement damage (neutrons, gammas, ion bombardment). Enhanced oxygen loss due to ion bombardment increases surface electrical conductivity, and at the same time the surface emits light due to ion beam induced luminescence (IBIL). Results for 3 types of α-alumina and sapphire measuring electrical surface conductivity and IBIL as a function of dose at different temperatures between 20 and 200 °C, show a clear correlation between luminescence and surface electrical degradation. This indicates the potential to remotely monitor insulating material degradation not only in ITER and beyond, but also in the more immediate in-reactor experiments required for materials testing. Partial reduction of degradation by heating in air suggests the possibility for in situ recovery of the insulating properties.     

Sensitization of MCF7 Cells with High Notch1 Activity by Cisplatin and Histone Deacetylase Inhibitors Applied Together

Histone deacetylase inhibitors (HDIs) are promising anti-cancer agents that inhibit proliferation of many types of cancer cells including breast carcinoma (BC) cells. In the present study, we investigated the influence of the Notch1 activity level on the pharmacological interaction between cisplatin (CDDP) and two HDIs, valproic acid (VPA) and suberoylanilide hydroxamic acid (SAHA, vorinostat), in luminal-like BC cells. The type of drug–drug interaction between CDDP and HDIs was determined by isobolographic analysis. MCF7 cells were genetically modified to express differential levels of Notch1 activity. The cytotoxic effect of SAHA or VPA was higher on cells with decreased Notch1 activity and lower for cells with increased Notch1 activity than native BC cells. The isobolographic analysis demonstrated that combinations of CDDP with SAHA or VPA at a fixed ratio of 1:1 exerted additive or additive with tendency toward synergism interactions. Therefore, treatment of CDDP with HDIs could be used to optimize a combined therapy based on CDDP against Notch1-altered luminal BC. In conclusion, the combined therapy of HDIs and CDDP may be a promising therapeutic tool in the treatment of luminal-type BC with altered Notch1 activity.     

Quantitative Proteomic Approach Reveals Altered Metabolic Pathways in Response to the Inhibition of Lysine Deacetylases in A549 Cells under Normoxia and Hypoxia

Growing evidence is showing that acetylation plays an essential role in cancer, but studies on the impact of KDAC inhibition (KDACi) on the metabolic profile are still in their infancy. Here, we analyzed, by using an iTRAQ-based quantitative proteomics approach, the changes in the proteome of KRAS-mutated non-small cell lung cancer (NSCLC) A549 cells in response to trichostatin-A (TSA) and nicotinamide (NAM) under normoxia and hypoxia. Part of this response was further validated by molecular and biochemical analyses and correlated with the proliferation rates, apoptotic cell death, and activation of ROS scavenging mechanisms in opposition to the ROS production. Despite the differences among the KDAC inhibitors, up-regulation of glycolysis, TCA cycle, oxidative phosphorylation and fatty acid synthesis emerged as a common metabolic response underlying KDACi. We also observed that some of the KDACi effects at metabolic levels are enhanced under hypoxia. Furthermore, we used a drug repositioning machine learning approach to list candidate metabolic therapeutic agents for KRAS mutated NSCLC. Together, these results allow us to better understand the metabolic regulations underlying KDACi in NSCLC, taking into account the microenvironment of tumors related to hypoxia, and bring new insights for the future rational design of new therapies.